Placas, láminas, hojas y tiras, de poli"tereftalato de etileno" no celular y sin esfuerzo, estratificación ni soporte o combinación similar con otras materias, sin trabajar o trabajadas solo en la superficie o solo cortadas en forma cuadrada o rectangular (exc. autoadhesivas, así como los revestimientos para suelos, paredes o techos de la partida 3918)

3920 62 12 00

Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates

3920 62 19 05

Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm

3920 62 19 08

Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either: - only dyed in the mass, or - dyed in the mass and metallised on one side

3920 62 19 28

Non-transparent poly(ethylene terephthalate) film: -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 N/cm or more (ASTM D-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm - covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites

3920 62 19 32

Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 70 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm

3920 62 19 38

Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm

3920 62 19 48

Sheets or rolls of poly(ethylene terephthalate): - coated on both sides with a layer of epoxy acrylic resin, - of a total thickness of 37 μm (± 3 μm)

3920 62 19 52

Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1|% of aluminium, of a thickness of not more than 300|µm and having a surface resistivity of not more than 10|000|ohms (per square) (as determined by the ASTM D 257|method)